|
|
|
|
Mechanical Field
Service
|
 Field
Laser alignment involves coordinating two shafts to run concentrically
by the use of a laser beam and receiver unit. By turning the coupled
shafts 180 degrees, the computer identifies the misalignment and
angularity of the two pieces. This system works very well on all shaft
pairs up to 30 feet apart. Diameter of shafts can be infinite, and
surface roughness is not a factor. Resolution can be as low as .001"
total run out with similar values for angularity. |
|
Wherever your job is located, Eastland can laser
align your equipment. A hard copy of beginning and ending readings is
printed for verification of accuracy. |
|
|
|
